ELASTASEAL 2 Gallon Kit Directions

Clean surface removing all dirt, dust, oil and all other contaminants. 

Preparation recommendations
Pressure wash, grinder, wire wheel, sandblast

Stainless Steel Surfaces: obtain a well etched surface

Concrete Surfaces:  Prime with DX-1100 Primer for Concrete prior to applying PANSEAL

Mixing
You will need to have a 5 gallon bucket to mix within.  Power mix part A resin separately and pour in to the 5 gallon bucket, then add part B hardener and power mix.   Pay attention to the sides and bottom of the bucket and mix to obtain a uniform color.

Application
Once mixed be ready to apply. Do not keep the blended coating in the original container unless immediate use is planned.  Otherwise, exothermic heat created during the curing process will considerably shorten the pot life.  Pour the coating into a rolling tray or pour directly onto the surface.  Try to keep the depth of the coating in the tray below 3/8”.                                            

Brush:  Use a medium bristle brush.                                                                                                    

Roller:  Use a short-nap synthetic roller cover with phenolic core.

Spray Application:  Refer to the Product Data PDF.  

Cleanup
Use MEK or Acetone. In case of spillage, absorb and dispose of in accordance with local, applicable regulations.

Safety
Refer to the SDS PDF                  

*See Product Data PDF for more complete detail.