Industrial Clear Marine Epoxy

PRODUCT PROFILE

Ultra-Clear HD Epoxy is a high-grade, 100% solids, amine adduct epoxy with non-yellowing, UV protection designed as a clear-coat, enhancement and preservation sealant for Heavy Duty applications to enhance and strengthen projects.  HD UltaClear is widely used in commercial and industrial industries.  Dyes, silicas, sands and other materials can be added within the product for desired results.  Industrial Epoxy is a 2 part, 2 to 1 ratio, professional grade system that enhances and preserves surfaces with high-strength 2,750 psi adhesion strength and durability.  HD UltraClear Epoxy will provide projects with beautifully artistic results while having the ability to withstand harsh conditions.  HD UltraClear is safe to apply, as it contains NO VOCs and has very minimal odor.

PRODUCT FEATURES & BENIFITS

• Ideal for commercial woodworking finishing and restoration.
• Ultra-clear top-coat with UV protection.
• Permanently enhances surfaces with wear resistant, chemical resistant and corrosion proof properties.
• Quick and easy - can be applied by brush, roller or sprayer (45:1 airless or higher).
• Easy 1 to 1 mix ratio.
• Ideal for all metal, fiberglass, stainless steel, concrete, stone and wood surfaces.

100% solids, free of volatile compounds, fumes and odor.

PRODUCT FEATURES & BENIFITS

• Ideal for commercial woodworking finishing and restoration.
• Ultra-clear top-coat with UV protection.
• Permanently enhances surfaces with wear resistant, chemical resistant and corrosion proof properties.
• Quick and easy - can be applied by brush, roller or sprayer (45:1 airless or higher).
• Easy 1 to 1 mix ratio.
• Ideal for all metal, fiberglass, stainless steel, concrete, stone and wood surfaces. 100% solids, free of volatile compounds, fumes and odor.

Recommended Uses

• Sealing Leaks and protecting surfaces with a clear finish.
• Boat building, laminating, woodworking, finishing
• Arts and Crafts
• Flooring
• Leak sealant and Corrosion Protectant

Packaging

Available in 16 oz and 32 oz kits as well as 1.5 5 and 10 gallon kits, Call for larger amounts.

Surface Type - Preparation

General Surfaces must be clean and dry. Remove all dirt, dust, oil and all contaminants.

Primer Self priming on most surfaces but apply Dynesic’s DX-1100 Primer prior to TopCoat on concrete surfaces.

• Metal, Galvanized - Many applications can be pressure washed or even scrubbed using a degreaser such as Dynesic’s DX-ETCH or with water (if there is no chance of oils or greases remaining on the surface). In more extreme conditions, or depending on surface type, obtaining an etched surface is recommended.
• Stainless Steel - Topcoat products have a difficult time adhering to slick surfaces however, TopCoat’s 2150 psi adhesion strength allows it to fully adhere to stainless steel. We recommend an etched profile that can be achieved by sand blasting or grinding.  Keep in mind t that an etched, rather than a polished profile is the goal.
• Concrete/CMU - Concrete must be cured 28 days at 75°F (24°C) and 50% relative humidity or equivalent. Prepare surfaces in accordance with ASTM D4258 Surface Cleaning of Concrete and ASTM D4259 Abrading Concrete.  Voids in concrete may require surfacing with PANSEAL Paste Grade (2500PG) to fill and strengthen the substrate.    Prime concrete surfaces first with Dynesic DX-1100 Concrete Primer.
• Fiberglass, Wood - Clean and apply.

* To coat over previously painted surfaces, contact Dynesic’s Technical Service Department.    

MIXING & THINNING

Mixing:    Power mix part A resin separately, then add part B hardener and power mix.  If using a thinner or additive, add and mix to part A prior to adding the hardener (Part B).

Thinning:       For Sprayer: Up to 6.5 oz/gal (5%) w/ Acetone or Xylene

For Brush:            Up to 16 oz/gal (12%) w/ Acetone or Xylene                                                                                           For Roller:            Up to 16 oz/gal (12%) w/ Acetone or Xylene

* Use of thinners other than those supplied or recommended by Dynesic may adversely affect product performance and void product warranty, whether expressed or implied.                                                                              

Ratio    1:1 ratio (A to B) by volume

Pot Life   8 hours 20 minutes at 5°C (41°F) , 2 hours at 25°C (77°F), 50 minutes at 33°C (92°F)

 CLEANUP & SAFETY                                                              

Cleanup Use MEK or Acetone. In case of spillage, absorb and dispose of in accordance with local, applicable regulations.

Safety Read and follow all caution statements on this product data sheet and on the MSDS for this product. Wear protective clothing, gloves.

PACKAGING, HANDLING & STORAGE

 Shelf Life 24 months at 75°F (24°C)

* When kept at recommended storage conditions and in original unopened packaging.

Shipping Weight (Approximate) 1 Gallon Kit: 12 lbs. (5.45 kg), 4 Gallon Kit: 50 lbs. (22.73 kg), 50 Gallon Drums: Part A 700 lbs./Part B 450 lbs.

Storage Temperature & Humidity

40° – 110°F (4° – 43°C)                                     0 – 100% Relative Humidity

Storage Store Indoors. This product is not affected by excursions below these published storage temperatures, down to 10°F, for a duration of no more than 14 days.

CURE SCHEDULE & RE-COAT WINDOW

TEMPERATURE  - MINIMUM RE-COAT MAXIMUM RE-COAT                                             10°C (50°F) 10 hours 14 days                        25°C (77°F) 8 hours 14 days                                 60°C (140°F) 1 hour Not recommended

DYNESIC TECHNOLOGIES

Dynesic produces exceptional chemically engineered coatings, adhesives and sealants offering premium corrosion protection, while being safe for the environment and safe/easy to apply.  Dynesic Technologies can be found protecting steel, ductile and concrete substrates worldwide.