$175.00

SILVERSHIELD – Gallon Kit

UV Resistant, Indoor/Outdoor Epoxy Paint
Part # – 5000X
Coverage – 267 square feet at 6 mils thickness, 133 square feet at 12 mils thickness

SILVERSHIELD Indoor/Outdoor Epoxy Paint

SILVERSHIELD Indoor/Outdoor Epoxy Paint is an ideal paint/coating for tough climate conditions because it's easy apply like paint, but much stronger.  Outdoor metal and steel structures are constantly subject to corrosion and paints will not protect them for long, on the other hand epoxies yellow in sunlight.  However, SILVERSHIELD is a high strength epoxy base formulated for outdoor use.  It contains silver flake which eliminates the UV yellowing effect and maintains a much longer lasting metallic finish.

 

Product Features & Benefits

  • Excellent Corrosion Resistance - 1600 psi Adhesion
  • Low Stress, Highly Flexible Film
  • Edge and Corner Protection
  • Surface Tolerant, Works on Rusted Surfaces
  • 100% Solids, No VOCs
  • Works on Metal, Fiberglass, Stainless Steel, Concrete and Wood Surfaces.
  • Contains Silver Flake for Long Term Metallic Finish
  • Rust Inhibitor - Indoor/Outdoor Epoxy Paint

Recommended Uses

  • Indoor/Outdoor Rusting and Corroding Surfaces
  • Pipe Exterior & Pipe Racks
  • Support Columns
  • Tank Tops and Tank Surfaces

  Rust Inhibitor and Condensation Barrier 

SILVERSHIELD Directions
Clean surface removing all dirt, dust, oil and all other contaminants. 

Preparation recommendations
Pressure wash, grinder, wire wheel, sandblast

Stainless Steel Surfaces: obtain a well etched surface

Concrete Surfaces:  Prime with DX-1100 Primer for Concrete prior to applying PANSEAL

Mixing
Power mix part A resin separately, then add part B hardener and power mix.   Pay attention to the sides and bottom of the bucket and mix to obtain a uniform color.

Application
Once mixed be ready to apply. Do not keep the blended coating in the original container unless immediate use is planned.  Otherwise, exothermic heat created during the curing process will considerably shorten the pot life.  Pour the coating into a rolling tray or pour directly onto the surface.  Try to keep the depth of the coating in the tray below 3/8”.                                            

Brush:  Use a medium bristle brush.                                                                                                    

Roller:  Use a short-nap synthetic roller cover with phenolic core.

Spray Application:  Refer to the Product Data PDF.  

Cleanup
Use MEK or Acetone. In case of spillage, absorb and dispose of in accordance with local, applicable regulations.

Safety
Refer to the SDS PDF                  

*See Product Data PDF for more complete detail.

SILVERSHIELD Data Sheet

SILVERSHIELD Part A SDS

SILVERSHIELD Part B SDS

Reviews

There are no reviews yet.

Be the first to review “SILVERSHIELD – Gallon Kit”